MISYNLON OBD OBD2 Hardwire Kit Power Cable Dash Camera 90Degre | Shop The World
From USA
NewMISYNLON
MISYNLON OBD OBD2 Hardwire Kit Power Cable for Dash Camera with 90Degree USB Type C 12-36V to 5V 3A,Low Voltage Protection 24h Parking Surveillance/Acc Mode with Switch for GPS, Radar-3.5M
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•OBD and OBD2 Dash cam power adapter suitable for most dash cameras, GPS, radar, and dash cams on the market. Just plugs into your car stock OBD or OBD2 port directly. Note: This unit DOES NOT work with EV Car/Electric Vehicle
•Two working mode: 24h Parking / ACC Mode Switch. Mode1: In this "MODE -", 24H parking monitoring, continue to power supply after the car is turned off, until the car battery voltage is lower than 11.6V, the OBD Power Cable will automatically stop power supply after a delay of 5 minutes
•Mode2: Press the red button switch to “MODE O” --The car ignites and starts the power supply, and the OBD line automatically stops the power supply after the car is turned off and delayed for 20 minutes, turn off the output
•Low voltage protection: OBD2 dash cam power cable built-in intelligent control chip, which can detect the battery power of the car in real time. When the battery voltage drops to the low voltage protection value 11.6V, the power output automatically enters the low voltage protection and turns off the output , thus preventing it from draining the battery
•Right Angle c type obd 2 dashcam cable: 90Degree type-c usb obdii adapter greatly improves the applicability of this cable in all kinds of settings, avoid damage to the cable due to bending. Perfect for tight spaces like cars,corners,etc
From USA
