DIYmalls BE-880 GPS Receiver Module Compass 10th Chip 38400bps 1Hz for Arduino FPV Flight Control, Replace BN-880 GPS

ℹ

Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.

•be880 GPS equiped with 10th chip to replace the bn880 gps, more accurate and receiving signal faster.
•Baud Rate: 4800bps to 921600bps, default 38400bps( Remember it is NOT 9600bps).
•be 880 module connection with flight control, usb to ttl and develop board: gnd to gnd, tx to rx, rx to tx, vcc to 5v.
•be-880 gps should be used outdoor, and the antenna side facing to the sky.
•The blue (TX) light flashes when power on, indicating there is data output.

From USA

NewDIYmalls

DIYmalls BE-880 GPS Receiver Module Compass 10th Chip 38400bps 1Hz for Arduino FPV Flight Control, Replace BN-880 GPS

ℹ

Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.

•be880 GPS equiped with 10th chip to replace the bn880 gps, more accurate and receiving signal faster.
•Baud Rate: 4800bps to 921600bps, default 38400bps( Remember it is NOT 9600bps).
•be 880 module connection with flight control, usb to ttl and develop board: gnd to gnd, tx to rx, rx to tx, vcc to 5v.
•be-880 gps should be used outdoor, and the antenna side facing to the sky.
•The blue (TX) light flashes when power on, indicating there is data output.

DIYmalls BE-880 GPS Receiver Module Compass 10th Chip 38400bps 1Hz for Arduino FPV Flight Control, Replace BN-880 GPS

DIYmalls BE-880 GPS Receiver Module Compass 10th Chip 38400bps 1Hz for Arduino FPV Flight Control, Replace BN-880 GPS

Need items in bulk?

100% Secure Payments